top of page

DJI Inspire 3


  • Full-frame 8K/75fps ProRes RAW

  • Full-frame 8K/25fps CinemaDNG
  • Up to 28 mins Flight Time

  • Ultra-wide Night-Vision FPV Camera
  • Top speed of 58mph

  • GPS


Master the Unseen


The Long awaited replacement for the Inspire 2 is now here! World-class Aerial Footage, Exceptional Video quality. 94KMPH Horizontal speed, Dual TB51 intelligent batteries provide up to 28 Mins of flight time and support for fast charging and hot swapping. At the peak of aerial cinematography, DJI Inspire 3 offers unprecedented workflow efficiency, camera language, and creative freedom. This all-in-one 8K camera drone empowers professional-level filmmakers to fully maximize the potential of any shot and master the unseen.


Sleek, Integrated Design


Inspire 3 is a professional camera drone that adopts a fluid new design that takes aerodynamics fully into consideration to reduce air resistance. The max dive speed has increased from the 9 m/s of Inspire 2 to 10 m/s, while the vertical ascend/descend speed has increased from 6 m/s and 4 m/s to 8 m/s. Powerful maneuverability delivers responsive, accurate control and an extended flight time of up to 28 minutes. 


The FPV camera, visual sensors, positioning antennas, and storage card slot all adopt designs that are seamlessly integrated into the airframe for a minimalist look and modern industrial aesthetics. Inheriting the classic transformable configuration of the Inspire series, Inspire 3 uses an all-new design that supports 360° Pan and Tilt Boost structures. When the landing gear is lowered, the gimbal supports obstruction-free 80° upward-angle shooting, enabling cinematographers to capture strikingly innovative shots. From the outer design to the internal structure, every detail of Inspire 3 was carefully considered and optimized.


Repeatable Routes


Using Repeatable Routes, the aircraft will automatically fly on the same route and maintain all preset parameters such as altitude, speed, gimbal angle, and camera settings. Repeating the same flight mission allows cinematographers to effortlessly perform difficult one-takes, or to fly at different times in the same place to easily create long-duration time lapses that capture transitions such as day to night or season to season.


3D Dolly


3D Dolly can simulate a crane, cablecam, or dolly on film sets while going far beyond the limitations of those devices. After planning a flight route, the cinematographer can manually control the aircraft to move along the route back and forth while adjusting parameters such as speed, gimbal angle, and more according to the needs of the shot. This makes complicated cinema-grade camera movements easier and more efficient and can deliver improved visual effects.


Tailormade 8K Sensor


DJI’s lightest-ever full-frame three-axis gimbal camera, the X9-8K Air, is custom-built for Inspire 3 to take drone cinematography to the next level. It features DJI’s latest image processing system, CineCore 3.0, supporting internal recording of up to 8K/25fps CinemaDNG video as well as 8K/75fps Apple ProRes RAW video, meeting the needs of top-class film and television productions.

8K means ultra-high-resolution aerial footage that retains true-to-life texture close to what the human eye sees, with clarity that stuns audiences when displayed on larger screens. RAW brings X9-8K Air's sensor fully into play, providing abundant space for visual effects and color grading. In S&Q mode, X9-8K Air supports internal recording of up to full-frame 4K/120fps ProRes RAW video without cropping, providing more creative editing options.


14+ Stops of Dynamic Range


X9-8K Air covers 14+ stops of dynamic range, which captures rich highlight and shadow details in complex lighting scenarios like sunrises and sunsets. High dynamic range brings more possibilities for post-editing, retaining genuine colors even after significant exposure adjustments.




Inspire 3 comes with a professional-level remote controller, the DJI RC Plus, which has a built-in 7-inch 1,200-nit high-bright screen to provide an extraordinary outdoor monitoring experience. It also features an HDMI out port, along with several buttons and dials on the front, back, and top, which enable fast and intuitive operation. Button functions can also be customized to fit users' habits and deliver a more smooth operating experience.


Independent Links for Dual Control


Compared with its predecessor, the dual-control experience of Inspire 3 has been significantly upgraded. Two remote controllers can receive live feeds and control the drone independently, so the pilot and gimbal operator can be at different positions on set. This breaks Inspire 2's limitations of binding the primary and secondary control links. If the pilot loses aircraft signal, the gimbal operator is now able to take control of the aircraft to safely return to home or land directly.


Supports DJI Transmission


With DJI Transmission, Inspire 3 supports expanded monitoring on set. Connect an RC Plus to a DJI Video Transmitter with Broadcast mode enabled. Then, live feeds can be transmitted to an unlimited number of remote monitors, further improving coordination efficiency.


Dual-Battery System


Inspire 3 is equipped with a new TB51 dual-battery system, which utilizes the latest battery chemistry technology for optimized reliability and performance.


TB51 batteries are smaller, lighter, more streamlined, and higher voltage compared to TB50. They provide a 28-minute max flight time and support hot swapping with a redesigned battery release that allows effortless continuous operation. If the temperature of the battery goes lower than 18° C (64° F), the battery will trigger an auto-heating function, maintaining adequate flight performance even in locations with temperatures as low as -20° C (-4° F).




The included DJI PROSSD 1TB supports a max read speed of 900Mbps and the footage can be read on a computer directly through the provided USB-C to USB-C cable without the need for a card reader.


What's in the box?


Inspire 3 Combo (no lenses)

  • 1 x Inspire 3 Aircraft
  • 1 x RC Plus (Inspire 3)
  • 1 x Double-Headed Screwdriver
  • 1 x USB-C to USB-C High-Speed Data Cable
  • 1 x USB-C to USB-A Data Cable
  • 6 x TB51 Intelligent Battery
  • 1 x TB51 Intelligent Battery Charging Hub
  • 7 x TB51 Intelligent Battery Charging Hub AC Cable
  • 1 x TB51 Intelligent Battery Paired Batteries Sticker
  • 3 x Inspire 3 Foldable Quick-Release Propellers (Pair)
  • 1 x PROSSD 1TB
  • 1 x Inspire 3 Trolley Case
  • 1 x RC Plus Strap
  • 1 x RC Plus Waist Support
  • 3 x Documents
  • 1 x Zenmuse X9-8K Air Gimbal Camera
  • 1 x Zenmuse X9-8K Air Gimbal Camera Case
  • 1 x Lens Carrying Box (18/24/35/50mm)
  • 2 x Inspire 3 Gimbal Rubber Dampers


18mm, 24mm, 35mm and 50mm DJI DL Lenses sold separately.

DJI Inspire 3 Combo Drone

Out of Stock
    bottom of page